Home BSS User Forum BSS General Discussion

Bss Blu 100 logic

Hi there. I am trying to control a blustream acm 200 to swap transmitters to different receivers. Can do through ip or rs232 but what I can’t seem to work out is the logic source to be able to put this onto a button on a hardware controller (4button 1 knob) how do o got about setting the button to trigger the output.



  • Essentially need a source that will give me a high output when a button is activated on the controller
  • Just drag the logic source button out of the logic design and onto the controller- that will work on an EC4BV or EC4B certainly.

  • DWSavDWSav Posts: 10


    have used BLU platform to control ACM200 >IP50TX/RX units.
    Need help drop me a PM


Sign In or Register to comment.