Best Of
Re: Is there any "up time" command i can enter into telnet?
The time stamp (1091743958 in the example) to any response shows the uptime in milliseconds
HARMAN_icraigie
Re: Is there any "up time" command i can enter into telnet?
- You don't need to create multiple identical topics.
- You can make your won uptime command in your code, as I don't believe there is (or was) a native command. We added it to our diagnostic library:
send s ct,'uptime
(1091743957) DIAGNOSTICS MODE - System Uptime Monitor: ON!
(1091743958) CineTouch System Uptime - 18190 Mins - Since: 10:50:36 05/29/2019
John Nagy
Re: Help with NX-3200
NX masters have fault detection turned on by default. This disables the serial port when a "fault" is detected and the only way to turn the port back on is to clear the fault. In my programs, in the online event for serial ports, I always do:
SEND_COMMAND DATA.DEVICE,'CLEAR FAULT'
SEND_COMMAND DATA.DEVICE,'SET FAULT DETECT OFF'
And then send the baud. This makes sure the port doesn't ever get shut off.
sentry07
Re: No sound at the outputs of my ui-24r
Have you called support?
https://www.soundcraft.com/en/support
Have you solved your problem?
marcopolo
Re: Ui16 doesn't recognize flash drives
I found this same thing recently. In my case or aspirated to be something related to Windows 10 formatting the flash drive. If I formatted it on another platform is works fine.
Aliby
Re: Signature 22 FX newbie.
I have the Signature 22MTK and they are reset at each power cycle.
Lefou
Re: DBX PA2 Loading Screen stuck
walfrett
Re: Why little sparking sound comming from my xls2002 and 2502 between some time intervals?
@Hifiguy2311 said:
Hi DMX...
Good call; I concur with your assessment, and it works even better in dimmed lighting so long as one keeps safety in mind.
Do you know if this forum moderated at all? I've seen nothing indicating such. I replied to a topic started by another new forum member but they have not responded. 'Could be any number of reasons. I wanted a moderator to contact the forum member at their registered email address to let them know that people have responded to their post.@Jensen said:
If the forum is moderated, its done quite poorly
Hello, and yes the forum is moderated. Forum users have the ability to set Notification Preferences in their Settings, and one of those is to be notified of replies to their threads or their posts. They also have the ability to not be notified; it's up to them. If I can help in any other way, just let me know.
@Sumit feel free to call HARMAN Pro Tech Support to help fix your issue. There is a Tech Support "sticky" thread for each brand that states contact info; let me know if you'd like help finding that.
HARMAN_Rob
Re: DPER error Mac 700 Profile
OOOO on bootup is normal for a second but if its for an extended amount of time (never changes) means there is a problem either with display connection or main PCB . In the manual, it says OPER "...there is an onboard programming error." Reinstallation of software could potentially cure the problem or it's the bios battery on the PCB itself. What leads me to the battery is that you say it boots up with error the first time then "when instrument is reset it goes to its address". So the battery isn't holding its charge and when it's powered for a minute or so and then reset it has enough to make it through to its boot cycle.
LITEMARE
Re: Firmware update
Use the MAC Axiom Hybrid Software uploader (91616069) to upload the new software
https://www.martin.com/en/softwares/mac-axiom-hybrid-software-v1-2-0
LITEMARE