DBX PA2 Loading Screen stuck
Nicholas_Sampson
Posts: 8
I have a dbx pa2 drive rack and when it is powered up, it does not go past the loading screen, I have tried a soft reset and a hard reset but when I hold down the utility/store buttons to perform the respectable functions the screen still does not change from the loading screen. I have also tried to update the firmware, the unit goes through the process and says that it was successful in installing the update but when it is finished it remains on the same loading screen. Also when I run the updater again it keeps saying that I am running an older version of the firmware although I have just successfully updated the software. I have tried to run audio through the drive rack and I get no signal from any of the outputs. i have tried holding down the recall button and that changes some text on the loading screen to "SDC USB enabled" but the screen still does not change. Is my drive rack just a paper weight now?
Best Answer
-
Options
walfrett
Posts: 10
The dbx technician sent me an email with the manufacturers updater. Basically it wipes it clean and reinstall the firmware. Send me your email and i can forward it to you. You willhave to retune your system afterwards though.9
Answers
a dbx rep contacted me about the driverack, basically saying that the firmware is corrupted and it can be sent to be repaired.
if you do decide to go through with it, could you let me know the cost to fix? I am located in the Caribbean, and shipping is a cost in itself, I ask the cost but didn't get a response. Hopefully yours is still under warranty.
Really? what did you do? or did it just happen like a ghost in the machine?
groundupdesigns@gmail.com, thank you so very much, if this works, I would really be happy.
It worked, thank you so very much, I owe you. I am eternally grateful.
Hello @walfrett ! Are you all right?
Walfrett, I saw that you were able to troubleshoot the PA2 Display issue, "Front Panel Update Required".
I have this same problem!
Please can you email me the file for recovery?
I will be very grateful to you!
My email is: haroldomoreno@hotmail.com
@walfrett look > https://drive.google.com/file/d/1namKrL8tAL1k_EqnHZNfY7DVsd5wQpEv/view
Is this PA2 file to clear the existing firmware still available? I could use a copy.
@john_kaufman and @DjHaroldo please send your email address and I ill send the file to you
Hello @walfrett , I seem to have the same problem, can you forward the file to admin@x0r.at, many thanks!
Es posible que me compartan el archivo, tengo el mismo problema Gracias
feelingentretenimiento@gmail.com
I tried both soft and hard reset but with no success.
Is it something that the file you mentioned on this page could solve?
mauro.munzi@outlook.com
Thank You So Muck
Mauro
Hola que tal sera posible que me compartan el archivo, ya que tengo el mismo problema con mi PA2 de antemano muchas gracias
mi correo es
zakrama@gmail.com
Hi! Same problem here. I got the link to manufacturers updater file, but unfortunately link was dead. Does any of you have stored the file PA2ManufacturingUpdater.zip somewhere? I'd be very thankful.
send your email please.
thanks
Muchas Gracias amigo Nicolas_Sampson, archivo recibido, en cuanto lo heche a andar les cuento que sucedio
Saludos a todos
same problem with my PAw2..please send me a file of firmware to wipe out the old firmware
my email Add : joel50801@gmail.com
Thank you very much
@pascal25
I had the same problem, please send me the updater the crazychung@yahoo.com
thanks
I HAVE SAME PROBLEM HER.. MY PA2 ALWAYS HANGUP
CAN I ASK FAVOR? DO YOU HAVE A COMPLETE COPY OF FIRMWARE OF DIRVERACK PA2?
IF YOU HAVE ONE.. CAN I ASK SOME........... MY EMAIL ADD IS : joel50801@gmail.com
THANK YOU IN ADVANCE
JOEL
mi driverack pa2 prende y sale la pantalla sin firmware encontrado usb listo que puedo hacer hay no sale de hay necesito ayuda
mi driverack pa2 prende y sale la pantalla sin firmware encontrado usb listo que puedo hacer hay no sale de hay necesito ayuda
correo jaime39gt@gmail.com