Home dbx User Forum dbx Archive Threads DriveRack 200 Series 200 Series General Discussion

Yorkville EX2000 Settings

closetsingleclosetsingle Posts: 3
Hi there:

I have an old set of Yorkville EX2000s, and the only help I've found from Yorkville is that they should be crossed at 1500 Hz. I was wondering if there was anyone out there who has slightly more helpful information. EAW is great about providing processor settings for their speakers, why can't yorkville?

Comments

  • DraDra Posts: 3,777
    I found the P2000EX & P2003EX proccesor manuals on the Yorkville site.

    http://www.yorkville.com/downloads/other/omp2000.pdf
    http://www.yorkville.com/downloads/other/omp2003.pdf

    I also have an 1994 product catalog.
    The catalog show a response of 55 - 20K.
    1000w prog
    cab = 4 ohm
    Sensitivity = 105
    Max SPL = 135
    1.5K cross from 15's to 2\" horn
    8K cross from 2\" horn to 1\" Tweet
    Horn disp = 60 x 40
    Sub crossover = 90 @ 18 slope
    Internal passive crossovers have 18 db slopes

    You can use the proccesor graphs at a guide for the settings. I wish they would just give the info instead of forcing us to adjust and check, fiddle and check, fiddle and faddle. But they don't.....
    If you are really lucky, Gadget has a pair of older Elite cabs, maybe even the 2000's, and can shed some light from his findings.

    DRA
  • DraDra Posts: 3,777
    Forgot to mention... I knew a guy locally that had these cabs. Real honkers (not in a bad way).

    DRA
  • DraDra Posts: 3,777
    Sorry also forgot the P2000 is for full range & sub and the P2003 is for Bi-amp & sub.

    DRA
  • Bit of a chore getting the driverack to match those curves, but feasible. Gonna try this config out later today, I'll let you know how it went.
Sign In or Register to comment.