Home dbx User Forum dbx Archive Threads dbx Archive General Configuration Wizard

setup driverack PA

jantblomjantblom Posts: 2
edited February 2009 in Configuration Wizard
I`m in a hurry due to tight scedule to get setup. Currently use an active db opera sub 15 with built in crossover along with two mackie srm 450 active sidespeakers.
How do I setup easily with the wizard?
-What main out do I use from the DR. Just any??
-What to select for main, sub, amp and so on in the wizard?
Guess I´ll have to do at least a partly manual setup since none of my speakers are repr. in the wizard,
-Is there an easyway to get going with the most important parameters to start with till I learn more later on.

Comments

  • GadgetGadget Posts: 4,915
    Do an all custom setup 2X3
    Set the (this is without ANY REAL INFO ) HPF on the sub to BW18@45 hz

    Find out what the xover point of the sub is... and set the LPF just below that @ LR24 filter.

    Set the HPF for the tops @ what you set the subs LPF @ (or just a few hz above) using again LR24 filter

    Hi outs L/R to the SRM..

    Left Mono lo out to the sub...

    Do a gain structure as in READ ME FIRST BEFORE POSTING...\"Strat here\"

    Read the FAQ's (the ones in the RMFBP section... lots of tips and tricks there

    Gadget
  • DraDra Posts: 3,777
    All custom.
    Stereo passive with mono sub.
    Mackies connect to Hi, L&R
    Sum to Low mono
    X-over
    Low (set onboard x-over as hi as it will go, set level to 12 o'clock to start)
    HPF 45 BW18
    LPF 90hz LR24

    Hi (set level to 12 o'clock to start)
    HPF 90hz LR25

    DRA
  • GadgetGadget Posts: 4,915
    Is there an echo in here :?: :lol::lol::lol::lol::lol::lol:
  • DraDra Posts: 3,777
    Is there an echo in here? (deep cavern)
    :wink:
    DRA
Sign In or Register to comment.