Home› dbx User Forum› dbx Archive Threads› DriveRack 200 Series› 200 Series Configuration Wizard
Options

Configuring the DR260

joncollinsjoncollins Posts: 3
edited April 2009 in 200 Series Configuration Wizard
Hi

I am just playing with the setup on a DR260 using the driveware. Maybe someone can answer these questions;

If I unlink stereo inserts etc. how do I link them back up again?

How do I configure the matrix? At moment all I appear to do is be able to select a standard setup with a matrix config that is almost what I want, then start from there?

Best wishes

Jon

Comments

  • Options
    GadgetGadget Posts: 4,915
    You would enter the \"Config\" mode, (press config button)there you can link and unlink the modules, re-distribute the delay, change the xover configurations...etc.. it's all done MUCH easier using the GUI if you aren't already...
    G
  • Options
    DraDra Posts: 3,777
    He is using the GUI.

    Jon, go to the \"Driverack Training Modules\" section above and do the 260 tutorial. It will really help you \"see\" how to do that and more.

    DRA
  • Options
    joncollinsjoncollins Posts: 3
    Hi,

    Thanks for that, I will try the training!!!!

    For anyone else's info, I sussed out the linking, you click on the first module, then hold down the ctrl key and you can select the 2nd module, then right click and you can link!

    Best wishes

    Jon
Sign In or Register to comment.