Home dbx User Forum dbx Archive Threads DriverRack PA & DriveRack PA+ PA Configuration Wizard

JBL SP4732A's Can I use the SR4732X tunings in DRPA?

bandeng71bandeng71 Posts: 13
edited March 2011 in PA Configuration Wizard
I'm getting a pair of SR4732A's. I've got an older DRPA with settings for SR4732X's. Since they use the same components can I just use those tunings?

Comments

  • GadgetGadget Posts: 4,915
    I believe you are in luck! one of our members has that exact rig! He is usually around.. in fact he asked a questio today that I just answered earlier.. I'll see if I can get him to chime in...

    Gadget
  • GadgetGadget Posts: 4,915
    BTW here:
    http://www.jblpro.com/catalog/general/t ... D=18&Run=1
    If you go down to the SR4732A you will get all the tuning information on them.
    G
  • bandeng71bandeng71 Posts: 13
    Thanks for the link....... :P
  • DennisDennis Posts: 801
    If the SR4732A does in fact have the same components as the SR4732X, the SR**X tunings should work or at least be a good starting point. Also, as pointed out by Gadget, there are a lot of tunings on the JBL website. Before I go any farther here, I'd like to ask a couple of questions. Are you biamping the 4732? So that would be 3 way with a sub? What amps are you using for sub, mid, and high?

    Dennis
  • MctwinsMctwins Posts: 113
    Yes, I want to know that to, the amps.

    Just test both settings and see. The gain is depended on witch amps is used.

    Gadget, I dont have this rig. Just FYI. Or maybe I missed something :)
    Thanks
  • GadgetGadget Posts: 4,915
    Hmmm sorry thought you were the one... sorry
    G
Sign In or Register to comment.