Home› dbx User Forum› dbx Archive Threads› DriveRack PA2
Options

Meaning of the red light on the store button

loekitoloekito Posts: 3
edited July 2015 in DriveRack PA2
Hi Everybody..

I'm confuse on the meaning of the red light of the store button.

Correct me if i'm wrong, is it meaning that we change some preset's parameters, but it haven't been saved/stored?

What happend here, I didn't do any change on the parameters, but suddenly the red light on the store button turn on by itself... after I store (pressing the store button three times), then the light goes out. But after a couple of minutes, the light is turn on again by itself.

Please advise, thanks a lot (sorry for my bad english)

Comments

  • Options
    DraDra Posts: 3,777
    Maybe the AFS is functioning? Or the Auto is active on a limiter? Turning on a module or adjusting an EQ band will turn the light on.

    Try this. Unplug the input cables from the PA2. Store it, and let it sit. Did it re-ignite the red light?
    DRA
  • Options
    loekitoloekito Posts: 3
    Hi DRA, thanks for your help, what you're saying is right, it's because of the AFS function. :)

    Thanks a lot..
Sign In or Register to comment.