Home dbx User Forum dbx Archive Threads DriveRack VENU360

DBX Venu 360

sm1983sm1983 Posts: 2
edited January 9 in DriveRack VENU360

Hi
My Venu 360 cannot get passed the splash boot screen. It's just frozen.
I have a video of the issue. Notice that a red LED inside the device is blinking red.

Video:
https://www.dropbox.com/s/4mta98jwrlhw45x/dbx_venu360_issue_l.mov?dl=0

Does anyone in here have a solution for this, either than repair?

BR,
Soren

Comments

  • sm1983sm1983 Posts: 2

    Hi
    In cass someone else sees this, that need the same support.
    With help from Harman support the following helped.

    1) Erase the firmware, while powering up press and hold buttons EDIT + RECALL and wait until the countdown finishes and the firmware is erased

    2) Use the manufacturing updater to reinstall the firmware

    3) Once the firmware has been reinstalled, update the firmware with the updater that can be found on the DBX website

    Link to manufacturerUpdater.
    You can download it here (24MB): https://eu-transfer.harman.com/link/jIq2PCQGrtuDQDLIcUJhnt

    Thank you.

    BR,
    Soren

  • HARMAN_EEldeHARMAN_EElde Posts: 1,144

    Hi Soren, sorry I did not see this previously, but I do not actively monitor anything marked under the Archive threads, make a thread in the main threads going forward. Glad you were able to contact support and get up and working.

Sign In or Register to comment.