Home› dbx User Forum› dbx Software
Options

DBX Driverack 260 firmware update to 1.61?

LauriLauri Posts: 10
edited January 2021 in dbx Software

Hello. My name is Utiu Laurentiu and I have a DBX Driverack 260 processor. I tried to make an updated firmware for the driverack, I succeeded, but I installed version 1.60. Only then did I read that if I already have 1.61 I should not update. With this version (1.60) the display moves slowly. Where can I download version 1.61 to return to this version? Thank you, best regards Laurentiu!

Comments

  • Options
    LauriLauri Posts: 10
    Solved , i Find the 1.61 Updater on another thread, update and work like a charm. Thanks
  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @Lauri said:
    Solved , i Find the 1.61 Updater on another thread, update and work like a charm. Thanks

    Okay good, I replied to your email too, if you're still having problems you can reach me via email.

  • Options
    djrotondadjrotonda Posts: 2

    donde se encuentra la liga de descarga, me paso lo mismo

  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @djrotonda said:
    donde se encuentra la liga de descarga, me paso lo mismo

    https://drive.google.com/file/d/1jkOSr4e_Dvsug0T_Q7hu96eVY96tXMKZ/view?usp=sharing

  • Options
    djrotondadjrotonda Posts: 2
    Quedo solucionado
    Muchas gracias
  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @djrotonda said:
    Quedo solucionado
    Muchas gracias

    You're welcome!

  • Options
    tmstew1tmstew1 Posts: 2

    i did the same thing can somebody send me the link for firmware 1.61

  • Options
    LauriLauri Posts: 10
    Read this topic , link posted here
  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @tmstew1 said:
    i did the same thing can somebody send me the link for firmware 1.61

    the link is in this thread.

  • Options
    shanrathoreshanrathore Posts: 1

    flash download of
    161000 problam

  • Options
    RAJURAJU Posts: 1

    DEAR SIR
    IWANT CDX260 FRAMWARE 1.610 PLEASE AREANGE ME SIR

  • Options
    itunustringsitunustrings Posts: 1
    I lost some programs on my DBX driverack 260 proccessor just left with 10 programs how can I reinstall it. I don't have my disk again
  • Options
    vishal08vishal08 Posts: 2

    i have falsh update dbx260 in error e5388 plz solution sir

  • Options
    vishal08vishal08 Posts: 2

    after update driver rack 260 prog complete checksum 298e error show

  • Options
    NitinsabbanNitinsabban Posts: 3
    > @HARMAN_EElde said:
    > https://drive.google.com/file/d/1jkOSr4e_Dvsug0T_Q7hu96eVY96tXMKZ/view?usp=sharing

    I have updated driverack 260 to Firmware 1.61 successfully using updater provided by you. All is well but i can't connect my driverack 260 to laptop using rs-232 cable after update. It is showing device is offline mode. After i downgraded to 1.60 it's connectivity working fine. Is there anything missing in firmware 1.61?
    I can't understand. Plz give me any solution for this.

    Thank you.
  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @Nitinsabban said:

    @HARMAN_EElde said:
    https://drive.google.com/file/d/1jkOSr4e_Dvsug0T_Q7hu96eVY96tXMKZ/view?usp=sharing

    I have updated driverack 260 to Firmware 1.61 successfully using updater provided by you. All is well but i can't connect my driverack 260 to laptop using rs-232 cable after update. It is showing device is offline mode. After i downgraded to 1.60 it's connectivity working fine. Is there anything missing in firmware 1.61?
    I can't understand. Plz give me any solution for this.

    Thank you.

    Depending on what revision PCB you have on your DriveRack 260 you may not even need the 1.61 updater. This was because of a hardware change. If the 1.60 is working and the system is not slowed down in operation then you need to run 1.60 on your system, etc

  • Options
    NitinsabbanNitinsabban Posts: 3
    @HARMAN_EElde
    Thank you for your quick response.
    Can you tell me what is the difference between both firmware versions.?
  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366
    edited May 2022

    @Nitinsabban said:
    @HARMAN_EElde
    Thank you for your quick response.
    Can you tell me what is the difference between both firmware versions.?

    To expound further on my last post, we made a hardware/manufacturing change that necessitated a firmware update for the 260 to be able to operate etc. There are no real functional differences other than that, it is specific to the hardware is all.

    If you have the previous PCB Board H/W revision, you have to run version 1.60, if you have the updated PCB Board, you have to use 1.61

  • Options
    NitinsabbanNitinsabban Posts: 3
    @HARMAN_EElde
    Now i understand very well.
    Thank you.
  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @Nitinsabban said:
    @HARMAN_EElde
    Now i understand very well.
    Thank you.

    You're welcome!

  • Options
    shaileshshailesh Posts: 1

    would like to update my firmware

  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366

    @shailesh said:
    would like to update my firmware

    What version are you on? Why do you want to update it?

    Keep in mind if you are on an older hardware revision of the DriveRack 260, you need to stay on version 1.60

    If you are on a newer revision of the hardware you need to stay on 1.61

    There is no other firmware updates that you need for the product, it is hardware dependent.

Sign In or Register to comment.