Dimmer Adjust Error on a Martin Viper Profile
I am looking for some help on a dimmer adjust error that I have been working on a Martin Viper Profile.
Here is what I have done so far:
I restored all my settings to default.
In the service menu, I restored all default calibration settings.
I adjusted the dimmer calibration settings to different increments, both positive and negative.
I have mechanically adjusted the dimmer flags on the module itself while the unit was on (both at 100% and at Zero).
I have replaced the pcb behind the display.
I have replaced the pcb on the color mixing module
Any advice on what I can do next would be much appreciated.