Home› AMX User Forum› NetLinx Studio

Protocol for InFocus JTouch INF7001a

J DonachiueJ Donachiue Posts: 9
in NetLinx Studio
Hello all, I cannot find the protocol for the Infocus JTouch INF7001a.

Does anyone know or have a copy of this.

I have checked the InFocus website and found nothing for any of the JTouch models.

Thank you all in advance.

Comments

  • ericmedleyericmedley Posts: 4,177
    I don't have those handy. But, in case you get no help on this, you might try downloading the AMX module for it. You could either use it, or at least watch the port and see what commands are being sent. I've found in most cases, the AMX modules do seem to work pretty well for projectors. But, it's not rocket surgery. So, doing it yourself makes a lot of sense too.
  • J DonachiueJ Donachiue Posts: 9
    Thank you both.

    The JTouch is an LCD with a touch overlay.
    The InFocus website does not have the protocol listed for the JTouch.

    Hello Raphael, do you know that the Mondopad and JTouch use the same protocol.

    I looked at the protocol for one of their projectors and the Mondopad and projector have completely different protocols.

    Eric,
    AMX does not have a module for the JTouch series as far as I can tell.
Sign In or Register to comment.