RS232 with V30 Vidikron

Denis

Hi everybody

Ysterday I replaced my V40 demo by the new model V30 Vidikron. Unfortunately, the commands codes are not the same.
I corrected my code but it's dosen't works. In the vidikron manual, it's indicated as all codes are in ASCII format ( in both manuals)

the code for power off is x002x for V30

My code is < SEND_STRING dvPROJ, "'X002X',$0D" >

The communication setting are the same for both model but it's seem not the to have communication between master and projector

Somebody can help me ?

Spire_Jeff

Have you verified that the projector is set to the same baud rate as the netlinx? In the past, my comm problems were fixed by changing the projector to 9600 baud. But I haven't played with the new V30 yet, so this might not even be able to be changed.

Jeff

alexanbo

The protocol I think is case sensitive, have you tried sending a lowercase x instead of the upper case X?

Denis

tanks guys, my problem was baud rate