AMX Audio Distribution
George Krietsepis
Posts: 284
Dear All,
I hope this finds everyone safe and healthy...
What I would like to share with you, is my big concern about the absence of AMX on the audio distribution.
Since the Autopatch series discontinuation, there has not been any replacement from the Harman group.
It is very hard for us when we are asked to propose a solution for audio distribution and we don't have any.
At this time, I need to replace an older Autopatch system for about 10 audio inputs x 40 audio outputs that is a basic audio distribution.
My question is very...clear :
What do you propose for such a design ?
Note that Autopach had full volume control commands as well as multi switching ones.
George
0
Comments
1* BSS Blu160:
-> 1* Analog Input Card = 8 Channel Analog Input + 2 * Analog Output Card = 8 Channels Analog Output
1* BSS Blu-120
-> 4* Analog Input Card = 16 Channel Analog Input
9* BSS Blu-BOB2
-> 72 Channels Analog Audio Output
So, all these products make an audio matrix switcher that can receive- from AMX - independent volume control commands for any output as well as simple or multiple switching commands for any input to any output...
Yes, it s a fully configurable DSP.
Beyond independent gain at every input and volume on every output EQ's and compressors and whatever can be added to the signal chain.
Alternate maybe throwing the inputs each on an Audinate AVIO adpater - replace the Blu160 and Blu120 (+ cards) with a Blu806DA (w/ the 2*Analog Input Cards).