Plasma to switch from Video to RGB

David_w

I have made an RGB and Video butoon for the Plasma and am trying to get it to switch when ever I hit the selected button. Below is the code I wrote but I keep getting error message anyone see what I am doing wrong.

Define_Function RGB_Select()
{
IF (!RGB_Input)
{
send_string dvPlasma,"'@G',13"
wait 20 send_string dvPlasma,"'%A1000',13"
SEND_STRING 0, "'%A1000',13"
On [RGB_Input]
Off[Video_Input]
}
}
Define_Function Video_Select()
{
IF (!Video_Input)
{
send_string dvPlasma,"'@G',13"
wait 20 send_string dvPlasma,"'%A1012',13"
SEND_STRING 0, "'%A1012',13"
Off [RGB_Input]
On[Video_Input]
}
}

Under Event

// Plasma RGB
BUTTON_EVENT[dvTP,302]
{
PUSH:
{
SEND_STRING dvPlasma,"'@G',13"
wait 10 send_string dvPlasma,"'A%1000',13"
send_string 0, ",'%A1000',13" /////// ERROR HAPPENS AT or Above.
}
}
BUTTON_EVENT[dvTP,303]
{
PUSH:
{
SEND_STRING dvPlasma,"'@G',13"
wait 10 send_string dvPlasma,"'A%1012',13"
send_string 0, ",'%A1012',13"
}
}

mpullin

Good ol' Fujitsu

The line immediately above your comment starts with A% instead of %A.
Also, the line of your comment has an extra comma in there -> ",'%A1000',13"

David_w

Thank you

Thank you so much.... I been looking at the code for about an hour now. At least someone knows what they are doing. Thanks again.

yuri

you have two functions to handle the switching but you don't use them?