Firmware for NXD-1200v
RicardoSiqueira
Posts: 373
in AMX Hardware
I am finishing a job and decided to flash the firmware of a NXD-1200v Modeo panel to the latest one and now things that were working fine prior to the firmware flashing don't work anymore:
- Web Control doesn't work
- Lutron LED feedback
- GE Abvent panel Link feedback
I wonder if anybody has experienced problems with firmware v.2.72.8 and have the firmware prior to this that I could get. You know, I had one of those days that everything was going fine until I had this problem. I should have known better: Do not update what is already working.The LED feedback for Lutron is on port 12 channels 501 to 620. I am using a device array with everything reporting to the Virtual panel. Any ideas or suggestions. Thanks,
Ricardo
ricardo@advancedanomaly.com
- Web Control doesn't work
- Lutron LED feedback
- GE Abvent panel Link feedback
I wonder if anybody has experienced problems with firmware v.2.72.8 and have the firmware prior to this that I could get. You know, I had one of those days that everything was going fine until I had this problem. I should have known better: Do not update what is already working.The LED feedback for Lutron is on port 12 channels 501 to 620. I am using a device array with everything reporting to the Virtual panel. Any ideas or suggestions. Thanks,
Ricardo
ricardo@advancedanomaly.com
0