Home› AMX User Forum› NetLinx Studio

ExpressVu 9200 or Dish Network 942 Codes?

gusgizmogusgizmo Posts: 15
in NetLinx Studio
I was wondering if anyone would be willing to share their capture of the ExpressVu 9200 or Dish Network 942 Codes? The codes in the database are for much older dish network models.

I have a cookie* for whoever would be willing to post these :D

*Not an actual cookie

Comments

  • shr00m-dewshr00m-dew Posts: 394
    Do a search on AMX.COM third party devices. The file 'dishnet7.irl' for the Vip211 should work just fine with that model. I'm sure it's learned for remote address 1, so you might have to change the receiver depending on where it is set.

    You will not be able to control TV2 via IR, at least not untill Dish releases the TV2 IR adapter kit later this year.

    Kevin D.
  • gusgizmogusgizmo Posts: 15
    Thank you very much for the tip, I ended up copying and pasting IR hex codes for the Dish 4900 from remotecentral.com into an IRL file, but I was still missing the DVR functions.

    Just to confirm for anyone who searches for this thread that the codes do indeed work for all functions.

    You're cookie is very well deserved and will hopefully not consume too much bandwidth :)
Sign In or Register to comment.