Modero panel feature request
VLCNCRZR
Posts: 216
I would like to see the added capability of assigning different active touch
settings to different states.
EX: ON state = Active Touch
OFF state = Pass Through
I have been experimenting with multiple settings to find ways to have a large button
"block" or "lock-out" control of other smaller buttons (underneath) depending on the state of the system.
In the past, I have created multiple pages and popups reflecting the different modes,
but I am tired of having so many redundant and repetitive pages in my project.
I have the graphics and visuals all working great, its just the touch mode that
screws me up. I will have to check to see if the touch mode can be changed on
the fly via code.
Has any else tried anything like this before??
Thanks in advance for any suggestions.
settings to different states.
EX: ON state = Active Touch
OFF state = Pass Through
I have been experimenting with multiple settings to find ways to have a large button
"block" or "lock-out" control of other smaller buttons (underneath) depending on the state of the system.
In the past, I have created multiple pages and popups reflecting the different modes,
but I am tired of having so many redundant and repetitive pages in my project.
I have the graphics and visuals all working great, its just the touch mode that
screws me up. I will have to check to see if the touch mode can be changed on
the fly via code.
Has any else tried anything like this before??
Thanks in advance for any suggestions.
0
Comments
I was able to get the exact button functionality that I needed by using
the embedded code for SHOW/HIDE button (%SW).
I keep my buttons assigned as "active touch", and just sent the
appropriate command when necessary.
I guess a line of code is a line of code as long as it does what you want.