Diagnostic message about Touch Panel

Pep_SD

Hi everyone,

I have a job with 7 TPs; four 5200i, one NXD-1000vi, one NXT-CV10 and one NXD-CV5.
All of them have the same layout and same functions.
For one of 5200i, I spotted these messages in the diagnostic window of Netlinx Studio:

Line     23 (14:07:14.596)::  Resending to 10003 count = 4 (latency=15) OldTimeout=250 NewTimeout=500$0A
Line     24 (14:07:24.672)::  Resending to 10003 count = 4 (latency=16) OldTimeout=250 NewTimeout=500$0A
Line     25 (14:07:29.646)::  Resending to 10003 count = 4 (latency=16) OldTimeout=250 NewTimeout=500$0A
Line     26 (14:07:34.693)::  Resending to 10003 count = 4 (latency=16) OldTimeout=250 NewTimeout=500$0A
Line     27 (14:07:36.640)::  Resending to 10003 count = 4 (latency=9) OldTimeout=250 NewTimeout=500$0A
Line     28 (14:07:37.705)::  Resending to 10003 count = 4 (latency=15) OldTimeout=250 NewTimeout=500$0A
Line     29 (14:07:38.207)::  Resending to 10003 count = 4 (latency=246) OldTimeout=250 NewTimeout=500$0A
Line     30 (14:07:38.479)::  Resending to 10003 count = 4 (latency=9) OldTimeout=250 NewTimeout=500$0A
Line     31 (14:07:39.054)::  Resending to 10003 count = 4 (latency=98) OldTimeout=250 NewTimeout=500$0A
Line     32 (14:07:39.411)::  Resending to 10003 count = 4 (latency=165) OldTimeout=250 NewTimeout=500$0A
Line     33 (14:07:40.229)::  Resending to 10003 count = 4 (latency=12) OldTimeout=255 NewTimeout=510$0A
Line     34 (14:07:40.746)::  Resending to 10003 count = 4 (latency=243) OldTimeout=254 NewTimeout=510$0A
Line     35 (14:07:41.578)::  Resending to 10003 count = 4 (latency=15) OldTimeout=271 NewTimeout=542$0A
Line     36 (14:07:43.529)::  Resending to 10003 count = 4 (latency=13) OldTimeout=250 NewTimeout=500$0A
Line     37 (14:07:44.729)::  Resending to 10003 count = 4 (latency=4) OldTimeout=258 NewTimeout=516$0A
Line     38 (14:07:45.362)::  Resending to 10003 count = 4 (latency=6) OldTimeout=274 NewTimeout=548$0A
Line     39 (14:07:46.230)::  Resending to 10003 count = 4 (latency=1) OldTimeout=431 NewTimeout=862$0A

All TPs 5200i have same latest firmware 2.66.21 (and the new battery btw).
Anybody who has ever experienced this?

DHawthorne

Most likely, the panel has started to fall off line, but hasn't been unresponsive long enough to trigger an OFFLINE event. I have seen similar messages during startup, but those go away once everything is up and running, unless there is a problem. I would suspect a network or cabling issue.