ClearOne Module: "ClearOne_Converge_v1_0_3_dr1_0_0"
jdonachiue@shaw.ca
Posts: 57
Please Help!
I am unclear as to how to determine the index scheme used for:
m_Inputs[TOTAL_COMPONENTS][32]
m_Outputs[TOTAL_COMPONENTS][32]
I understand the 1st index is the port for the Virtual Device,
but how does the 2nd index reference into the DSP Config File?
Does:
m_Output[1][1] - Reference "Master Room"
...
m_Output[1][21] - Reference "Mipro 1"
m_Output[1][22] - Reference "Mipro 2"
m_Output[1][23] - Reference "Mipro 3"
m_Output[1][24] - Reference "Podium"
Attached is the ClearOne Console Config Image
http://www.amxforums.com/images/attach/png.gif
Thank you for any help.
I am unclear as to how to determine the index scheme used for:
m_Inputs[TOTAL_COMPONENTS][32]
m_Outputs[TOTAL_COMPONENTS][32]
I understand the 1st index is the port for the Virtual Device,
but how does the 2nd index reference into the DSP Config File?
Does:
m_Output[1][1] - Reference "Master Room"
...
m_Output[1][21] - Reference "Mipro 1"
m_Output[1][22] - Reference "Mipro 2"
m_Output[1][23] - Reference "Mipro 3"
m_Output[1][24] - Reference "Podium"
Attached is the ClearOne Console Config Image
http://www.amxforums.com/images/attach/png.gif
Thank you for any help.
0