Home› AMX User Forum› AMX General Discussion
Options

Login for Lutron QS procedure

cmacma Posts: 94
in AMX General Discussion
Writing a module for LutronQS.. can't find any documentation on the procedure/strings for the initial login.

Help! :D

Comments

  • Options
    viningvining Posts: 4,368
    cma wrote: »
    Writing a module for LutronQS.. can't find any documentation on the procedure/strings for the initial login.

    Help! :D
    I believe the default is
    user: lutron
    password: integration
  • Options
    cmacma Posts: 94
    I went into the QS software, there is a 'defult','default' telnet setup in the program under the program tab and "integration". i added 'amx','1988' to the telnet connections.

    When I start an IP connection in netlinx I get nothing back on the buffer at all as far as a request for a login or anything for that matter. When I watch the diagnostics window I get this:

    "Line 133 (09:57:40):: IPSocketManConnectTask - connect Timed Out"
    "Line 134 (09:57:40):: CIpEvent::OnError 0:3:1"

    Unfortunately I am doing this remotely and am not on site..
  • Options
    cmacma Posts: 94
    OK, just got off the phone with someone onsite.. it appears that they cannot telnet to the main processor as well but they can telnet into the second processor.. looks like I have something else going on.
Sign In or Register to comment.