Yamaha RX-A2030 IP Control

Comments

• bano Posts: 175

  June 2014

  volume up = YamahaRemoteControl/ctrl?<YAMAHA_AV cmd="PUT"><Main_Zone><Volume><Lvl><Val>Up</Val><Exp></Exp><Unit></Unit></Lvl></Volume></Main_Zone></YAMAHA_AV>
  
  volume down = YamahaRemoteControl/ctrl?<YAMAHA_AV cmd="PUT"><Main_Zone><Volume><Lvl><Val>Down</Val><Exp></Exp><Unit></Unit></Lvl></Volume></Main_Zone></YAMAHA_AV>

  0
• MasterReboot Posts: 20

  June 2014

  Hm...
  
  I meant: http://192.168.x.xxx/ "and now ????"

  0
• bano Posts: 175

  June 2014

  try this http://files.remotecentral.com/library/22-1/yamaha/index.html

  0
• MasterReboot Posts: 20

  June 2014

  ... Hm... I just want to know a line like: http://ipadress/blablabla
  which I can copy in my Browser to for example set the Main Power to on.
  I allready have all the command stuff but I coudn't figure out how to use them.
  I tried a lot of things - nothing will work.

  0
• MasterReboot Posts: 20

  June 2014

  Nobody any idea?

  0
• HARMAN_Lanussinio Posts: 35

  June 2014

  JAR module RXA2010
  
  Maybe you could try the JAR module for the RXA2010.
  It may work.

  0
• the8thst Posts: 470

  June 2014

  http://ci.yamahaconnect.com/
  
  Full control protocol docs are available at their CI site. The control is simple and very easy to write a module for.

  0
• MasterReboot Posts: 20

  June 2014

  ... but there I need a Yamaha Dealer ID a.s.o.

  0
• ericmedley Posts: 4,177

  June 2014

  I'd wager that if you write or call them they will hook you up. It is rare that I don't get some kind of response. It happens on occasion but most times their tech support just emails the docs out. In this business you cannot give up too easily.

  0
• cmason Posts: 123

  December 2014

  I have YNCA Protocol Specification docs.
  
  What's the forum policy on posting third party docs here?

  0