Home› BSS User Forum › BSS Archive Threads› Discussion› Omnidrive/Minidrive

366 or 366T?

Walling1Walling1 Posts: 3
in Omnidrive/Minidrive
I can't seem to find any info on what improvements the 366T has over the 366. I'm looking to pickup one or the other used. What are the differences?

Thanks!

-Dave

Comments

  • Dan LynchDan Lynch Posts: 472
    If you download and install the latest firmware, the difference is the logo on the front. If you really care about what was added to the T version, I can look it up, but it's simple enough to just load up the newest firmware. Then you have a 366T regardless of what the silkscreen on the front panel says.

    Dan
  • Walling1Walling1 Posts: 3
    Cool, that's what I had begun to suspect.

    Thanks!

    -Dave
  • cvandeccvandec Posts: 1
    Confirmed.
    You can change a 366 into a 366T by updating the firmware. That's what I did with mine.
    The 366T firmware includes NTM crossover filters in addition to the usual Bessel, Butterworth and Linkwitz Riley. This is described in detail in the Omnidrive doc which you can download from the site.
    Cheers
    Christian
This discussion has been closed.