Home› BSS User Forum › BSS Archive Threads› Discussion› London Architect with Soundweb London

Blu-10 timeout to start page

davevandavevan Posts: 0
in London Architect with Soundweb London
I'm having issues where the BLU-10 is not timing out to its start page. I have the Start Page ON in the properties for the BLU-10 and I have played around with the delay from 15 secs to 2 mins (default) and the BLU doesn't seem to time out.

Any thoughts?

Dave

Comments

  • rob birchrob birch Posts: 106
    Have you tried setting the 'sleep brightness' so that it is below the normal level? (on the default control panel)

    Cheers

    Rob
  • davevandavevan Posts: 0
    I was just playing with that. I set the sleep timeout to 1 sec (or 5 sec, 10 sec) and the sleep brightness to 0 with the active brightness at 100% and it won't time out for this either.

    So both the sleep timeout and the start page timeout are not working. This is consitent for 6 BLU-10s that I have on a project.

    Dave
  • AntAnt Posts: 1
    Have you turned them on as well as setting the times?
  • davevandavevan Posts: 0
    yes, although I had another BLU-10 come in and I had no problems getting it to work here in the office. I will re-address the setup of my site BLU-10s to make sure I didn't forget something.

    Thanks,

    Dave
This discussion has been closed.