Home› BSS User Forum › BSS Archive Threads› Discussion› London Architect with Soundweb London

Units on BLU-10 pots

djkevinzdjkevinz Posts: 2
in London Architect with Soundweb London
I have put in a couple of BLU-10s in schools as simple mic volume controls. The problem is that I can't find out how to change how the volume level is displayed to the user.

These people don't have any idea what a dB is, nor do they need 1/100 of a dB precision. On a control panel you can change the scale to '1-10' or something like that but how to do it on the BLU-10?

Comments

  • Dan LynchDan Lynch Posts: 472
    With the BLU-10 Button Setup page active, go to the Properties window. Scroll down to the button you want to change and set its type to \"Meter\". That will cause the BLU-10 to display a graphic on the screen showing the current volume setting as a meter running from left to right. Much less confusing to civilians than -4.56dB. The graphic does not appear on the Button Setup page. You have to run the simulator or load the file to the BLU-10 in order to see it.

    Dan
This discussion has been closed.