Home› BSS User Forum › BSS Archive Threads› Discussion› London Architect with Soundweb London

9015 as a mixer

JynxJynx Posts: 2
in London Architect with Soundweb London
Hey guys,

I'm hoping someone here can help me out. I need to use a 9015 as a mixer interface for a BLU-16.

Basically I need to have the selector knob assign which fader is controlled by the up/down buttons. Is this possible? If so, where to I start?

I already know how to assign a fader to the up/down buttons on the control inputs. Where to go from here is beyond me.

Cheers!

Comments

  • Dan LynchDan Lynch Posts: 472
    http://www.bssaudio.com/phpBB2/viewtopic.php?t=292

    Dan
  • turffssnwturffssnw Posts: 2
    I followed the steps in how to make the 9015 select 8 different volumes and it worked great. I know that it is possible to change the percentage that the up/down buttons increase/decrease, but I'm having trouble figuring that out. I am hoping to go in 3dB increments like a standard volume control. Anybody have any more detailed advice on how to do this?
  • Dan LynchDan Lynch Posts: 472
    Doing 3dB bumps isn't posible. You can only bump by % of the fader's travel. The dB value of each bump will be much larger when the fader is near the bottom of its value than when it's near the top.

    Dan
This discussion has been closed.