Control pages
Selwyn Cozens
Posts: 3
Hello,
I am new to soundweb design (London Architect).
I wish to make some custom control pages to improve the workflow of my design. I would like to build input and output meter pages, gain/mute, EQ and delay pages.
The only way I have found to do this is to cut and paste from inside of the BLU-80's \"default config.\" page or from the \"design\" sub menu under view. I have to cut and paste each individual meter, fader, EQ etc.. and assemble it in the new control page. This is time consuming and I am concerned about making an error - copying the same meter twice etc..
I am sure there is a faster way to do this.
Also:
I have a BLU-10. I need to set this up as a switch between 2 different banks of 16 input channels. These channels are input bundles fed via cobranet.
Cheers
I am new to soundweb design (London Architect).
I wish to make some custom control pages to improve the workflow of my design. I would like to build input and output meter pages, gain/mute, EQ and delay pages.
The only way I have found to do this is to cut and paste from inside of the BLU-80's \"default config.\" page or from the \"design\" sub menu under view. I have to cut and paste each individual meter, fader, EQ etc.. and assemble it in the new control page. This is time consuming and I am concerned about making an error - copying the same meter twice etc..
I am sure there is a faster way to do this.
Also:
I have a BLU-10. I need to set this up as a switch between 2 different banks of 16 input channels. These channels are input bundles fed via cobranet.
Cheers
0
Comments
http://www.bssaudio.com/trainingmodules.php
You'll learn how to do custom control panels, program the BLU-10, etc.
Dan
The first thing I did before beginning the design was down load the offline modules - and they have been very helpful.
I have figured out a slightly faster way.
Cheers.