Extracting Object ID's for Third Party Control
soundmindz
Posts: 0
One piece of the convention space that I am configuring is connector panels. The facility has more than 80 connector panels, each with (2) mic and (1) line input.
The system is controlled by a third party control system with touchpanels in each meeting room.
My mission is to control all of these mixer inputs with the touchpanels and of course this requires the Object IDs of each of the mixer devices in the system.
Does anyone have an easy way to extract a list of objects with their HiQnet Addresses that contain object IDs so that they do not have to be manually clicked on, copied and entered into a spreadsheet?
I have given intelligent Object Names to the devices so that an extracted list will easily identify the object's purpose in life.
The system is controlled by a third party control system with touchpanels in each meeting room.
My mission is to control all of these mixer inputs with the touchpanels and of course this requires the Object IDs of each of the mixer devices in the system.
Does anyone have an easy way to extract a list of objects with their HiQnet Addresses that contain object IDs so that they do not have to be manually clicked on, copied and entered into a spreadsheet?
I have given intelligent Object Names to the devices so that an extracted list will easily identify the object's purpose in life.
0
This discussion has been closed.
Comments
Yes, the feature has been requested many times.
Dan