Control panel won't close
Dan Lynch
Posts: 472
I had a customer yesterday with a control panel that was always open no matter what he did. In design mode, everything was fine, but the default control panel for one of his digital input cards was always open if he went to operate mode (or online). Clicking on the close button for that window did nothing. The behavior was caused by that control panel being set as his start page for the admin user. While any control panel is open, you can go to the Control Panel Pages window, right click on Main (or the name of the panel), and select Set As Start Page. That will cause London Architect to switch to that panel every time that user goes online and there will by no way to close that control panel.
To eliminate the start page assignment:
* click on TOOLS / SET UP DESIGN SECURITY SETTINGS
* click on the SET START PAGE... button
* click on the CLEAR SELECTION button (even though no selection is shown)
* click OK
* click CLOSE
Dan
To eliminate the start page assignment:
* click on TOOLS / SET UP DESIGN SECURITY SETTINGS
* click on the SET START PAGE... button
* click on the CLEAR SELECTION button (even though no selection is shown)
* click OK
* click CLOSE
Dan
0