Home› BSS User Forum › BSS Archive Threads› Discussion› London Architect with Soundweb London

HELP! BLU-100 lost power while updating Firmware

mskinnermskinner Posts: 4
in London Architect with Soundweb London
I really hope this thing isn't dead!

I have tried everything I can think of, and the only thing that does anything is if I connect with a terminal program, and I say RMAC is gives it's MAC. other than that, it's totally dead.


HELP!!

Comments

  • John ClarkJohn Clark Posts: 14
    Hold locate on power up. The unit should go into boot loader mode (all three LED's turn orange). At this point you can reload firmware using the Boot Loader program (under help>run utility>Boot Loader). Just enter the mac address and select add to list. Select browse and BLU100 firmware, standard transfer mode and select start. The unit will take a few minutes to finish updating once the loader has finished. Once the unit finishes it will reboot on its own.
Sign In or Register to comment.