Home› BSS User Forum › BSS Archive Threads› Discussion› London Architect with Soundweb London

Programming newby

dannywadsdannywads Posts: 2
in London Architect with Soundweb London
Help! Working on a system and need a little programming advice! Basically the system was designed with a BLU-100 and a 9015 wall switch. There are 5 local inputs going into the BLU-100 (card A 1-4, Card B 1) that are supposed to be controlled with the 9015. There are 2 more inputs on Card C 3,4 that are basically meant to just pass straight through. Outputs go out of Card D 1,2. I am trying to figure out how to put in the 9015 so that it can control those input levels! Basically, there is a FOH mixer and then there are stage inputs so the client does not have to turn on console at FOH if limited mic jacks are needed, they can just be controlled by 9015. Thanks for the help! Have a great day!

Comments

  • HARMAN_Jerome_KingHARMAN_Jerome_King Posts: 328
    As you can appreciate, it will be difficult to answer your question here. How about exploring the Soundweb training material on offer?
    Go to the Training page of the BSS website and click on Self-Paced training. Start by watching the training videos. Then you could look at the Application Guides on this User Group. There are example designs and how-to guides one of which is \"Connecting a 9012, 9015\"
Sign In or Register to comment.