Options
DSP run continually at 100% - FYI
Vito
Posts: 2
Configuration: Blu-800, Blu-160, Blu-120, Blu-102 and Windows 7 with 5.02 of the London Architect software. Networking via a single Cisco switch.
Recently, I experience a frustrating issue. When I would go online with a design the DSPs, one or many would jump to 100% utilization. It was odd as I have used various BSS products for the last several year and never experienced the issue.
What I found was that when the system I was using for BSS was upgraded all of the networks were selected in the London Architect Preferences. Once only the active network interface was selected the issue cleared.
Hopefully, this post saves someone else time and frustration.
Best,
Vito
Recently, I experience a frustrating issue. When I would go online with a design the DSPs, one or many would jump to 100% utilization. It was odd as I have used various BSS products for the last several year and never experienced the issue.
What I found was that when the system I was using for BSS was upgraded all of the networks were selected in the London Architect Preferences. Once only the active network interface was selected the issue cleared.
Hopefully, this post saves someone else time and frustration.
Best,
Vito
0