Feedback processing (AEC) BLU 101
Tompa
Posts: 2
Hi, i have one bss blu 101. I am using it for 2.1 PA system.
I need some feedback processing and i don't know how the best way is to set it up.
I have input 1 and input 2 (R/L), i want to set the system up in two different modes, and it should remove the feedback from the signal.
1. the mic signal is with the music into input 1 and 2.
2. the mic signal is going directly into the bss (input 3), and the music are coming in input 1 and 2.
To day the setup i am using in audio architect is like this.
https://www.dropbox.com/s/u9gzdj407y9d212/20161228_152843.jpg?dl=0
I need some feedback processing and i don't know how the best way is to set it up.
I have input 1 and input 2 (R/L), i want to set the system up in two different modes, and it should remove the feedback from the signal.
1. the mic signal is with the music into input 1 and 2.
2. the mic signal is going directly into the bss (input 3), and the music are coming in input 1 and 2.
To day the setup i am using in audio architect is like this.
https://www.dropbox.com/s/u9gzdj407y9d212/20161228_152843.jpg?dl=0
0