Home dbx User Forum dbx General Discussion

When using DriveRack PA2 should the DSP of Amps be switched off

Hello, still a little bit empty in this forum, but i have a question so i'll try a new topic.
I'm new to pa systems and setup and I currently own:
Yamaha mg16xu mixer
Crown xti 4002 to drive 2 prx412m
Crown xti 6002 to drive 2 prx418s
I'm interested in buying a Driverack PA2 mainly for the compressor, feedback reduction and EQ, which all can be easily accessed via my iPad. My amps are currently loaded with the JBL speaker tunings. My question is should I completely switch off the DSP on the Crown amps when using the PA2.
Thanks Paul.

Comments

  • pifspifs Posts: 3

    Should i post this question on another forum?

  • HARMAN_EEldeHARMAN_EElde Posts: 1,365

    Sorry for the long delay, we had transitional changes and the forums are just finally being monitored and ramped up.

    I always advise to bypass any built in DSP settings in speakers and amps if you want to utilize features like AutoEQ, and having DSP settings on largely defeats the purpose of using the PA2 in the first place.

Sign In or Register to comment.