Home› dbx User Forum› dbx Archive Threads› DriverRack PA & DriveRack PA+› PA Configuration Wizard

Program Fullrange - problems

SlavekSlavek Posts: 9
edited June 2008 in PA Configuration Wizard
Recently I bought Driverack PA and put it into the system: Allen&Heath PA20 mixer and T.amp amplifier, Dynacord subs and tops. I'm still waiting for new amps, so I can not run it in 2-way mode.

We were surprised, that the sound of the system was a lot worse than before, without Driverack PA. I also tried to improve the sound with the RTA Auto EQ (with a adequate mic), but it didn't help. There was no \"power\" and \"clearity\" anymore.
:( :shock:
Is it because of the fullrange mode?

Where seems to be the problem?

Thanks for your help!

Slavko, Slovenia, Europe

Comments

  • DraDra Posts: 3,777
    What setting did you use? (x-over, GEQ, PEQ's, Limiters, Compressor, etc.)

    DRA
  • SlavekSlavek Posts: 9
    Just Auto EQ (also without Auto EQ), Limiter (set to 0), the rest was like in the factory program 03 Fulrange.
  • DraDra Posts: 3,777
    Go in a set up a new program with the wizard. Selecting \"custom\" for the amps and speakers.
    Set up the x-over filte as BW 18 at whatever the -3db point of the speakers are. Store the program. Do a gain structure set-up as described in the READ ME FIRST section.

    DRA
  • SlavekSlavek Posts: 9
    Thanks, I'll try it.

    Slavek
Sign In or Register to comment.