Options
Overlapping x-over for delay fills
Dra
Posts: 3,777
Here's a good question.
Let's suppose a basic Top + Sub combo at FOH with system crossed at 100hz. If delay fills are used 30 - 40 ft out for better average spl in a 100 ft deep room, what is the best practice? Mimic the x-over point (filter) or let it drop to say 70hz (-3db is 55hz) to fill some upper low frequencies? Speech is a no brainer, but for music playback with singing...?
Is this an if / then thing based on the size of the coverage area and the distance to the delays as to whether one or the other is prefered?
DRA
Let's suppose a basic Top + Sub combo at FOH with system crossed at 100hz. If delay fills are used 30 - 40 ft out for better average spl in a 100 ft deep room, what is the best practice? Mimic the x-over point (filter) or let it drop to say 70hz (-3db is 55hz) to fill some upper low frequencies? Speech is a no brainer, but for music playback with singing...?
Is this an if / then thing based on the size of the coverage area and the distance to the delays as to whether one or the other is prefered?
DRA
0
Comments
G
DRA