Home› dbx User Forum› dbx Archive Threads› DriverRack PA & DriveRack PA+› PA Configuration Wizard

Question about subs being stereo or mono

smurraysmurray Posts: 25
edited April 2009 in PA Configuration Wizard
I have what will hopefully be a quick and simple question. My church currently has two subs that are being driven by a single qsc RMX1450 amp. The amp is in bridged mono mode and the subs are daisy chained off of that amp. When I'm going through the config wizard of the DRPA, I would choose mono for my subs, not stereo right? I'm assuming stereo is only used if you use both the left and right low outputs of the DRPA. Can someone confirm this please.

Comments

  • GadgetGadget Posts: 4,915
    Assuming you were using a pair of tops, and a pair of subs your best plan is to use a 2X3 setup which would have the tops coming out of the \"Hi\" outs and the subs out of the \"Left\" mono out...subs are mostly omnidirectional and as such the low end is best left mono.. yes
    smiley-typing.gif
Sign In or Register to comment.