Connection the Driverack PX to Powered Subs First...
radiodjs
Posts: 5
I was wondering if the Driverack PX would still be able to process the signal properly, if I were to feed a signal to each of my subwoofers first, and then run a line up to my tops from the sub output?
I use 2 JBL PRX518S and 2 EV ZXA5 (all 4 are powered).
This would save me from running 4 separate lines, one to each speaker.
I use 2 JBL PRX518S and 2 EV ZXA5 (all 4 are powered).
This would save me from running 4 separate lines, one to each speaker.
0
Comments