Home› dbx User Forum› dbx Archive Threads› DriverRack PA & DriveRack PA+› PA General Discussion

behringer ep2500 power amp

drzrocksdrzrocks Posts: 11
edited August 2009 in PA General Discussion
will any power amp preset in the dbx pa that will work with a behringer ep2500 power to power two 18in. Eminence subs..Thanks

Comments

  • GadgetGadget Posts: 4,915
    No... but then why do you need a preset?
    Gadget
  • drzrocksdrzrocks Posts: 11
    Sorry about the confusion,I'm new to this dbx pa...What I meant to ask is what amp would I choose in the wizard that would work well with my behringer ep2500,because they don't have behringer amps in their list..
  • GadgetGadget Posts: 4,915
    What you are asking for is an amp input sensitivity...Which by the way is 1.23 volts I assume 8 ohms...(the website says (VRMS @ 8 W)) :roll: :roll:

    So I see you haven't visited the \"READ ME FIRST BEFORE POSTING\" section :?:

    The thing is... if your using subs, it's a moot point...even so it really doesn't matter a whole bunch, but what it means is that if you push the DRPA to full output, with the amp input sensitivity set @ 1.23 volts the amp will reach full output potential. This concerns me in that you REALLY don't want to clip the DRPA :!: :!: :!: THAT'S BAD BAD JuJu...

    Here is the location of the RMFBP section
    http://www.dbxpro.com/forum/viewforum.php?f=61
    and the FAQ section...
    http://www.dbxpro.com/forum/viewforum.php?f=60

    READ!
    Gadget
Sign In or Register to comment.