Help with DRPA+
emorales
Posts: 3
Hy need a little help here. :oops:
I just bough the DRPA+ and need help setting it up wit my PA
My equipment is:
2 JBL EON 515
2 JBL EON 518
1 Behringer Xenyx 1662FX
Now I set it up yesterday but I feel it wasn't performing like it should. I tried the set up wizard but since I don't have the RTA mic i couldn't auto eq. Need help from A to Z. EQ, Crossover points, compression, the whole thing. I mainly will be doing corporate gigs but a full band here and there. So any help would be greatly appreciated.
I just bough the DRPA+ and need help setting it up wit my PA
My equipment is:
2 JBL EON 515
2 JBL EON 518
1 Behringer Xenyx 1662FX
Now I set it up yesterday but I feel it wasn't performing like it should. I tried the set up wizard but since I don't have the RTA mic i couldn't auto eq. Need help from A to Z. EQ, Crossover points, compression, the whole thing. I mainly will be doing corporate gigs but a full band here and there. So any help would be greatly appreciated.
0
Comments
viewtopic.php?f=61&t=959
This thread explains what crossover type and why...
viewtopic.php?f=60&t=1204
As to your specific rig I would set the HPF for the sub lower than the subs and let the sub determine the HPF...but I would probably suggest 90 hz LR24 for the sub/top crossover.
The rest is all in the FAQ section... and some reading if you want to learn...
viewforum.php?f=60
G
G