Mains/Subs and Monitors

TS-12

Can I use one driverack (PA,PA+ or 260..) for Mains/Subs and also for Floor monitors?

Gadget

Yes, either the 260 or PA...

the 260 offers full feature functions with completely separate outputs(all modules are dual mono), the DRPA offers dual mono with basic (GEQ, xover, and auto EQ) features...

The 260 is more than 10 times the processor the DRPA is (sonically, and feature wise)...but more money ( less than twice the price )

I put this post in the FAQ section:
viewtopic.php?f=60&t=2228

and it deals with a 2 way system (tops and subs), running mono, with a single monitor channel. It also has a single channel of monitor output, all on one DRPA/DRPA+.

this assumes a "working knowledge" of the Driverack platform and it's features and operation...

Gadget

TS-12

but they have just 2 input channels. so the system will have to be set up for mono or for stereo the monitors will not be able to be controlled thru 'standard' aux out feed from mixer. right?

Dra

You can set up a mono FOH (full range or up to a 5-way system) and a single monitor mix.

Or mono FOH (typical passive tops and subs) and a single monitor mix (with individual control (PEQ, HPF, etc) of up to 4 monitors.

Or other config.

2 mixes in - 2 mixes out (up to 6 routings)

DRA

Sorry - referring to the 260

Gadget

I gave you an entire how to tutorial...and all you needed to do was send one output from the mixer main outs and the other form an aux send for either monitor feeds or aux subs?????

What is the question here?
G