Home› dbx User Forum› dbx Archive Threads› DriveRack PX
Options

DBX PRX635 for main and JBL Consumer Line Powered Sub

whodahellisbobbywhodahellisbobby Posts: 2
edited November 2012 in DriveRack PX
Hey Team,

I'm wondering if the DVX PX is the right unit for me. I'm using 2x JBL PRX635 for my mains is there a built in config for those on the PX since i was told this unit was meant for powered units.

Second.. I'm wanting to use an addtional sub JBL PB12 that has a level line RCA(L,R) in. would it be possible to connect this using the Sub Out on the Drive rack using a XLR to RCA cable?

Comments

  • Options
    GadgetGadget Posts: 4,915
    The driveracks will work with powered or passive speakers, if the PX has the features you need it will work fine, and yes, the XLR to RCA should be fine, you'll need to adjust the gain of the xover for the low outs...

    NOTE... the DRPA+ and 260 could do a mains/subs AND a single monitor mix, the DRPA also has some minimal alignment delay..

    You don't need any presets just a HPF/LPF for the subs/tops and I would start @ 100hz LR24...
Sign In or Register to comment.