Driverack PX configuration for Mackie Hd1801 & SR1530Z

muumipeikko

Could anyone help me configurate Driverack PX for this setup...
Subs: Mackie HD1801
Highs: Mackie SR1530Z
http://www.mackie.com/products/hd1801/
http://www.mackie.com/products/sr1530z/

Dra

Since the sub has a full time (no by-pass) low pass (hi-cut) filter @ 100hz LR24, you will use that and match the high output filter of the DRPX using a high pass 100hz LR24 as well. You will need to set the low pass of the DRPX's low output to either "out" or anywhere above 400hz. The filter type (BW, LR, etc) does not matter, in this case. The sub has a low frequency protection scheme set up at 40hz (I think), so if you want to be extra safe you can set a high pass filter at 25hz or 30hz BW18, just in case the onboard filter has a hiccup.


DRA

muumipeikko

Now my setup is changed little...Could i have some help with these
Driverack PX , Driverack PA
Subs: Mackie HD1801*2
Db Technologies Arena SW18 + t.amp 2400
Highs: Mackie SR1530Z

http://www.mackie.com/products/hd1801/
http://www.dbtechnologies.com/EN/Produc ... _p755.aspx
http://www.thomann.de/fi/t-amp_ta2400.htm
http://www.mackie.com/products/sr1530z/