Options
DBX Driverack PA2 Blue Screen
1UP
Posts: 1
Hey guys,
When i turn the PA2 on, it powers up shows the installed firmware and then falls into blue screen. Can´t unmute the channels as well, no signal is going through. Any idea?
Hard and Soft Reset haven´t made any changes.
0
Comments
Try the Factory Manufacturing Firmware Updater here:
https://help.harmanpro.com/pa2-manufacturing-updater
It will require a USB Cable and a Windows PC
Hi all,
I had the same problem and it was fixed by the procedure you described HARMAN_EElde.
Thank you very much!
Excellent!! You're welcome!