Home AMX User Forum AMX Control Products

MVP8400 with dynamic image

DenisDenis Junior MemberPosts: 163
Hi

In my demo MVP8400, I inserted a dynamic image to simulate a doorcam, this image is on our web site and it's linked to panel trough dynamic image via url

This function was worked for 1 1/2 years without problems. Since few weeks, I don't know why, I can't get this image

I revised router set-up and all seem ok

Some body can help me?

Comments

  • yuriyuri Junior Member Posts: 861
    try if you can see the image in your resource manager in TPD4. It's CTRL+M
    if you double click on your dynamic image, it should popup the current image :)
  • funkyskierfunkyskier Junior Member Posts: 48
    DNS issue most likely

    Do an nslookup on your dynamic image URL. Instead of using the domain name in the the dynamic image properties, enter the IP address instead. That should fix your problem. If this confirms the problem, then edit the DNS server properties in the MVP Wireless setup pages. I use 68.12.16.25 (Cox DNS) and 4.2.2.4 (Verizon DNS). Good Luck!!
Sign In or Register to comment.