Home› AMX User Forum› NetLinx Modules & Duet Modules
Options

Fujitsu_P42HHA30_v1_0_1_dr1_0_0.zip

viningvining Posts: 4,368
in NetLinx Modules & Duet Modules
Downloaded this from the InConcert site two Fridays ago to get a Fujitsu plasma that we installed temporarily to work. Really only wanted simple functions.

Here's the comm file module definition in the main.axs: 
DEFINE_MODULE 'Fujitsu_P42HHA30_Comm' DuetCode(vdvDEVICE, dvDEVICE)
This is the comm file contained in the zip. Doesn't match! 
Fujitsu_P42HHA30_Comm_dr1_0_0.jar
Ok, changed the file name of the .jar to that of the module definition. Now it compiled but nothing really works. Now I don't recall if it even power on and off work but I would assume it didn't because that's really all I wanted. A few buttons did work though.

This was Friday afternoon and I wanted to get this up and running for the weekend when the homeowners were expexted to be up from Manhatton. That didn't happen (the up and running part). So for the rest of Friday, Saturday and Sunday I got to write the attached.

I didn't have time to get crazy w/ a seperate comm module and set up a virtual to pass commands so there's a combination UI/Comm module but here it is if any body wants it.

Note: changed zip filename to avoid confusion w/ Danny's

Comments

  • Options
    Danny CampbellDanny Campbell Posts: 311
    Try this. It is one that I wrote that just does the basics.

    - Danny

    PS. Sorry - I didn't read the last part of your message. I thought you were looking for a file.
  • Options
    viningvining Posts: 4,368
    Danny Campbell wrote:
    Try this. It is one that I wrote that just does the basics.
    It's the thought that counts! This would have been real nice two weeks ago.

    Thanks
    Dan
Sign In or Register to comment.