Home› BSS User Forum › BSS Archive Threads› Discussion› Audio Architect with Soundweb London
Options

Dante IP on Blu-DA

jbirkmanjbirkman Posts: 32
in Audio Architect with Soundweb London
Is there a way to manually address the DANTE ports on the Blu-DA?

Comments

  • Options
    HARMAN_Jerome_KingHARMAN_Jerome_King Posts: 328
    The IP address of the Dante port is set using Dante Controller software. Go to Network Config tab in the Device View.
  • Options
    jbirkmanjbirkman Posts: 32
    \Jerome King\ wrote:
    The IP address of the Dante port is set using Dante Controller software. Go to Network Config tab in the Device View.

    I did this and all the fields in the network area of the DANTE controller are grayed out. I need to check the version of the DANTE controller.
  • Options
    HARMAN_Jerome_KingHARMAN_Jerome_King Posts: 328
    The details are greyed out because your PC is not in the same IP address range as that of the Dante card. The IP address of the Dante card can only be changed when the PC and the Dante card are in the same IP address range.
    Dante Controller will discover the Dante card and display it's IP address. Simply sert your PC with an IP address that is in the same range. Then the details will not be greyed out and you will be able to change the card's IP address in the Network Config tab.
Sign In or Register to comment.