Driverack pa+ with all powered speakers

Dcaugust

Hello...I got a lot of help from you guys when I initially bought my driverack, so I figured I would return for more of your expertise.

I am switching my setup a little for the purpose of increased mobility, so I now have a ksub along with 2 ev ELX12P mains.

Can I still use the pa+ with this setup, and if so, what is my best option for setting these up to use the dbx for setting crossover and not the internal circuitry?

Thanks guys!

Dra

Yes. Set up a 2 x 3 (stereo w/ mono sub). Just follow the wizard, selecting "custom" when your speakers aren't in the list. Adjust the x-overs to...
30hz BW18 - 100hz LR24
100hz LR24 - out

DRA

Dcaugust

Thanks! Do I have room to play with that crossover point, or is that where I need to keep it? Also, I was just reading your post from
http://www.dbxpro.com/forum/viewtopic.php?f=60&t=2228
And I was wondering if I could do something similar with my setup with in ears being eq'ed by dbx and maybe even an aux fed sub..

My full setup would be:
Ksub
2 EV ZLX 12P
Driverack pa+
Presonus 16.0.2
Shure psm200


Thanks for all of your help!

Dra

Play away. That is Gadget's post, but if it meets your needs, I see no reason it won't work for you.

DRA