Does anyone know if when hooking up JBL SRX 725's in bi-amp mode, no subs if you should hook the low or mid output of the DRPA+ to the LOW/MID amp? Right now I have 5 Xti amps on my system running a 2x5 configuration. I run a Xti 1000 on the HIGHS (stereo) of the 725's, a Xti 4000 on the MIDS (stereo) of the 725's and a Xti 4000 on LOWS for my JBL SRX 718's (bridge mono), a Xti 2000 for monitors and another XTI 2000 for extra subs when we run them. We have a few small venues we play and instead of packing in the 718's I would like to try just running the 725's and let the 2x15's pull the low-end work load. Just want to make sure before hand how to connect to the DRPA+. I have already configured the DRPA+ for the 725's and the amps I am using and no sub option, I just dont know what output to use on the DRPA+.