Options
Crossover and filters Question
Stoneclad
Posts: 6
My question is, do these crossover Freq. and Filter combos look reasonable?
My Setup:
2 JBL JRX 115 speakers on top Manufactures Frequency Range (-10 dB):2 38 Hz - 16 kHz Frequency Response (±3 dB):2 50 Hz – 12.5 kHz
I have them set at Hi pass 121Hz – Low Pass OUT with a Butterworth 36db/oct as the bottom and a Linkwitz Riley 48db/oct as the top
2JBL JRX 118s speakers for mids Manufactures Frequency Range (-10 dB):1 38 Hz - 300 Hz Frequency Response (±3 dB):1 47 Hz - 300 Hz
Have them set at Hi pass 86 Hz – Low pass 167 HZ with Butterworth 36db/oct as the bottom and Linkwitz Riley 12db/oct on the top end.
2EV Bass horn cabinets loaded with Eminence OMEGA PRO-18A speakers with a Manufactures Usable Frequency Range 40 Hz - 0.8 kHz
Have them set at Hi pass 40.7 HZ – Low Pass 224 HZ with Butterworth 30db/oct bottom and Butterworth 36db/oct for the top
Using Crown XLS 1500’s on the top. Behringer Europro EP 2500’s for the mids and
Two Carvin HD 1500’s each bridged for 900 watts.
My Setup:
2 JBL JRX 115 speakers on top Manufactures Frequency Range (-10 dB):2 38 Hz - 16 kHz Frequency Response (±3 dB):2 50 Hz – 12.5 kHz
I have them set at Hi pass 121Hz – Low Pass OUT with a Butterworth 36db/oct as the bottom and a Linkwitz Riley 48db/oct as the top
2JBL JRX 118s speakers for mids Manufactures Frequency Range (-10 dB):1 38 Hz - 300 Hz Frequency Response (±3 dB):1 47 Hz - 300 Hz
Have them set at Hi pass 86 Hz – Low pass 167 HZ with Butterworth 36db/oct as the bottom and Linkwitz Riley 12db/oct on the top end.
2EV Bass horn cabinets loaded with Eminence OMEGA PRO-18A speakers with a Manufactures Usable Frequency Range 40 Hz - 0.8 kHz
Have them set at Hi pass 40.7 HZ – Low Pass 224 HZ with Butterworth 30db/oct bottom and Butterworth 36db/oct for the top
Using Crown XLS 1500’s on the top. Behringer Europro EP 2500’s for the mids and
Two Carvin HD 1500’s each bridged for 900 watts.
0
Comments
For the JBL JRX100 series, there is already a “wizard� for them at PA2. BUT, by my personal opinion (and not only), is better to choose (cross point): 100hz LR24 rather than the 125hz BW24 the “wizard� recommend!
DRA